D-Link DES-3200 Switch User Manual


 
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
385
48
PROTOCOL VLAN COMMANDS
The Protocol VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table:
Command Parameters
create
dot1v_protocol_group
group_id <int 1-16> {group_name <name 32>}
config
dot1v_protocol_group
[group_id <int 1-16> | group_name <name 32>][add protocol [ethernet_2 |
ieee802.3_snap] <hex> |delete protocol [ethernet_2 | ieee802.3_snap] <hex>]
delete
dot1v_protocol_group [ group_id <int 1-16> | group_name <name 32> | all ]
show
dot1v_protocol_group { [ group_id <int 1-16> | group_name <name 32> ] }
config port dot1v ports [ all ] [ add protocol_group [ group_id <int 1-16> | group_name <name 32>] [vlan
<vlan_name 32> | vlanid <int> ] { priority <value 0-7> } | delete protocol_group
[group_id <int 1-16> | all ] ]
show port dot1v {ports <portlist> }
Each command is listed, in detail, in the following sections: