Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
151
enable gvrp
Purpose
Used to enable GVRP on the Switch.
Syntax
enable gvrp
Description
This command, along with disable gvrp below, is used to enable and
disable GVRP on the Switch, without changing the GVRP configuration
on the Switch.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To enable the generic VLAN Registration Protocol (GVRP):
DES-3200-28:4#enable gvrp
Command: enable gvrp
Success.
DES-3200-28:4#
disable gvrp
Purpose
Used to disable GVRP on the Switch.
Syntax
disable gvrp
Description
This command, along with enable gvrp, is used to enable and disable
GVRP on the Switch, without changing the GVRP configuration on
the Switch.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To disable the Generic VLAN Registration Protocol (GVRP):
DES-3200-28:4#disable gvrp
Command: disable gvrp
Success.
DES-3200-28:4#
show vlan
Purpose
Used to display the current VLAN configuration on the Switch
Syntax
show vlan [<vlan_name 32> | vlanid <vidlist> | ports <portlist> ]
Description
This command is used to display summary information about each
VLAN including the VLAN ID, VLAN name, VLAN Type, the
Tagging/Untagging status, and the Member/Non-
member/Forbidden status of each port that is a member of the
VLAN.
Parameters
<vlan_name 32> − The VLAN name of the VLAN for which to
display a summary of settings.
vlanid <vidlist> − Specifies a range of multiple VLAN IDs to be
displayed.
ports <portlist>
−
Specifies a port or range of ports that will be