xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
22
disable web
Purpose
Used to disable the HTTP-based management software on the
Switch.
Syntax
disable web
Description
This command disables the Web-based management software on
the Switch.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To disable HTTP:
DES-3200-28:4#disable web
Command: disable web
Success.
DES-3200-28:4#
save
Purpose
Used to save changes in the Switch’s configuration to non-volatile
RAM.
Syntax
save {[config|log|all]}
Description
This command is used to enter the current switch configuration into
non-volatile RAM. The saved switch configuration will be loaded into
the Switch’s memory each time the Switch is restarted.
Parameters
config – Used to save the current configuration to a file.
log – Used to save the current log to a file. The log file cannot be
deleted.
all – Save changes to currently activated configurations and save
log. If no keywords are specified, save the changes to the
configuration. If there are no keywords specified, the changes will be
saved to the configuration.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To save the Switch’s current configuration to non-volatile RAM:
DES-3200-28:4#save config
Command: save config
Saving all configurations to NV-RAM...... Done.
Success.
DES-3200-28:4#
To save the Switch’s current log to non-volatile RAM: