xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
161
Example usage:
To configure an interface’sIPv4 network address:
DES-3200-28F:4# config ipif System ipaddress 10.48.74.122/8
Command: config ipif System ipaddress 10.48.74.122/8
Success.
DES-3200-28F:4#
To configure an interface’s DHCP option12 host name:
DES-3200-28F:4# config ipif System dhcp_option12 hostname switch1234
Command: config ipif System dhcp_option12 hostname switch1234
Success.
DES-3200-28F:4#
To configure an interface’s DHCP option12 state:
DES-3200-28F:4# config ipif System dhcp_option12 state enable
Command: config ipif System dhcp_option12 state enable
Success.
DES-3200-28F:4#
show ipif
Purpose
Used to display the configuration of an IP interface on the Switch.
Syntax
show ipif
Description
This command will display the configuration of an IP interface on
the Switch.
Parameters
None.
Restrictions
None.