xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
229
disable sntp
Purpose
To disable SNTP server support.
Syntax
disable sntp
Description
This command is used to disable SNTP support. SNTP service must
be separately configured (see config sntp).
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To disable SNTP support:
DES-3200-28:4#disable sntp
Command: disable sntp
Success.
DES-3200-28:4#
config time
Purpose
Used to manually configure system time and date settings.
Syntax
config time <date ddmmmyyyy> <time hh:mm:ss>
Description
This command is used to configure the system time and date
settings. These will be overridden if SNTP is configured and
enabled.
Parameters
date – Express the date using two numerical characters for the day
of the month, three alphabetical characters for the name of the
month, and four numerical characters for the year. For example:
03aug2003.
time – Express the system time using the format hh:mm:ss, that is,
two numerical characters each for the hour using a 24-hour clock,
the minute and second. For example: 19:42:30.
Restrictions
Only Administrator-level users can issue this command. Manually
configured system time and date settings are overridden if SNTP
support is enabled.