Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
320
41
MLD SNOOPING COMMANDS
The MLD Snooping commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
config mld_snooping [vlan <vlan_name 32> | vlanid <vidlist> | all] { state [enable
| disable] | fast_done [enable | disable] } (1)
config mld_snooping querier [vlan <vlan_name 32> | vlanid <vidlist> | all]
{ query_interval <sec 1-65535> | max_response_time
<sec 1-25> | robustness_variable <value 1-255> |
last_listener_query_interval <sec 1-25> | state [enable |
disable] | version <value 1-2>} (1)
config mld_snooping
mrouter_ports
<vlan_name 32> [add | delete] <portlist>
config mld_snooping
mrouter_ports_forbidden
<vlan_name 32> [add | delete] <portlist>
enable mld_snooping
disable mld_snooping
show mld_snooping {vlan <vlan_name 32> | vlanid <vidlist>}
show mld_snooping group {vlan <vlan_name 32> | vlanid <vidlist>}
show mld_snooping
mrouter_ports
{vlan <vlan_name 32> | vlanid <vidlist>} { [static | dynamic
| forbidden]}
Each command is listed, in detail, in the following sections.
config mld_snooping
Purpose
Used to configure MLD snooping on the Switch.
Syntax
config mld_snooping [vlan <vlan_name 32> | vlanid <vidlist> | all]
{ state [enable | disable] | fast_done [enable | disable] } (1)
Description
This command is used to configure MLD snooping on the Switch.
Parameters
<vlan_name 32> - The name of the VLAN for which MLD snooping is
to be configured.
<vidlist> - The range of VIDs to be configured.
all – Select to configure all the VLANs on the Switch.
state - Allows you to enable or disable the MLD snooping function for
the chosen VLAN.
fast_done - Enable or disable the MLD snooping fast done function. If
enabled, the membership is immediately removed when the system
receives the MLD done message.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To configure the MLD snooping to the default VLAN with the state enabled: