xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
140
config dscp_mapping
Purpose
Used to map the DSCP value in the IP header of incoming packet
to one of the four hardware queues available on the Switch.
Syntax
config dscp_mapping dscp_value <value 0-63> [class <class_id 0-
3>]
Description
This command is used to configure DSCP mapping to traffic class.
Parameters
<value 0-63> − The DSCP value of the incoming packet you want
to associate with the class ID.
<class_id 0-3> − The number of the Switch’s hardware priority
queue. The Switch has four hardware priority queues available.
They are numbered between 0 (the lowest priority) and 3 (the
highest priority).
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To configure DSCP map to traffic class:
DES-3200-28:4#config dscp_mapping dscp_value 8 class 1
Command: config dscp_mapping dscp_value 8 class 1
Success.
DES-3200-28:4#