Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
312
show qinq
Parameters
None.
Restrictions
None.
Example usage:
To show global Q-in-Q status:
DES-3200-28:4#show qinq
Command: show qinq
QinQ Status: Enabled
DES-3200-28:4#
show qinq ports
Purpose
Used to show global Q-in-Q and port Q-in-Q mode status.
Syntax
show qinq ports {<portlist>}
Description
This command is used to show the global Q-in-Q status, including:
port role in Q-in-Q mode and port outer TPID.
Parameters
<portlist> - Specifies a range of ports to be displayed.
If no parameter is specified, the system will display all Q-in-Q port
information.
Restrictions
None.
Example usage:
To show the Q-in-Q status for ports 1 to 4:
DES-3200-28:4#show qinq ports 1-4
Commands: show qinq ports 1-4
Port Role Outer TPID Trust_CVID VLAN Translation
----- ---- ---------- ---------- ----------------
1 NNI 0x88a8 Disabled Disabled
2 NNI 0x88a8 Disabled Disabled
3 NNI 0x88a8 Disabled Disabled
4 NNI 0x88a8 Disabled Disabled
Total Entries : 4
DES-3200-28:4#
config qinq ports
Purpose
Used to configure Q-in-Q ports.
Syntax
config qinq ports [<portlist> | all] {role [nni | uni] | outer_tpid <hex 0x1 -
0xffff> | trust_cvid [enable | disable] | vlan_translation [enable | disable]}
(1)
Description
This command is used to configure the port level setting for the Q-in-Q
VLAN function. This setting is not effective when the Q-in-Q mode is