xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
331
enable igmp_snooping multicast_vlan
Purpose
Used to enable the multicast VLAN function.
Syntax
enable igmp_snooping multicast_vlan
Description
This command is used to control the multicast VLAN function. The
ISM VLAN will take effect when IGMP snooping multicast VLAN is
enabled. By default, the multicast VLAN is in a disabled state.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To enable an IGMP snoop multicast VLAN:
DES-3200-28:4# enable igmp_snooping multicast_vlan
Command: enable igmp_snooping multicast_vlan
Success.
DES-3200-28:4#
disable igmp_snooping multicast_vlan
Purpose
Used to disable the multicast VLAN function.
Syntax
disable igmp_snooping multicast_vlan
Description
This command is used to disable the multicast VLAN function. By
default, the multicast VLAN is in a disabled state.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To enable IGMP snoop multicast VLAN:
DES-3200-28:4# disable igmp_snooping multicast_vlan
Command: disable igmp_snooping multicast_vlan
Success.
DES-3200-28:4#
show igmp_snooping multicast_vlan
Purpose
Used to view multicast VLAN information.
Syntax
show igmp_snooping multicast_vlan {<vlan_name 32>}
Description
This command is used to display multicast VLAN information.
Parameters
<vlan_name 32> − The name of the multicast VLAN to be shown.
If no parameters are specified, the system will display all
multicast VLANs on the Switch.
Restrictions
None.
Example usage:
To display IGMP snooping multicast VLAN information: