D-Link DES-3200 Switch User Manual


 
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
270
DES-3200-28:4#config ssh authmode password enable
Command: config ssh authmode password enable
Success.
DES-3200-28:4#
show ssh authmode
Purpose
Used to display the SSH authentication mode setting.
Syntax
show ssh authmode
Description
This command is used to display the current SSH authentication set
on the Switch.
Parameters
None.
Restrictions
None.
Example usage:
To view the current authentication mode set on the Switch:
DES-3200-28:4#show ssh authmode
Command: show ssh authmode
The SSH Authmode:
-------------------------------------------------
Password : Enabled
Publickey : Enabled
Hostbased : Enabled
DES-3200-28:4#
config ssh server
Purpose
Used to configure the SSH server.
Syntax
config ssh server {maxsession <int 1-8> | timeout <sec 120-600> |
authfail <int 2-20> | rekey [10min | 30min | 60min | never]} (1)
Description
This command is used to configure the SSH server.
Parameters
maxsession <int 1-8> Allows the user to set the number of users
that may simultaneously access the Switch. The default setting is 8.
contimeout <sec 120-600> Allows the user to set the connection
timeout. The user may set a time between 120 and 600 seconds.
The default is 120 seconds.
authfail <int 2-20> Allows the administrator to set the maximum
number of attempts that a user may try to logon utilizing SSH
authentication. After the maximum number of attempts is exceeded,
the Switch will be disconnected and the user must reconnect to the
Switch to attempt another login.
rekey [10min | 30min | 60min | never] Sets the time period that the
Switch will change the security shell encryptions.