Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
158
show lacp_ports
Syntax
show lacp_ports {<portlist>}
Description
This command is used to display the LACP mode settings as they are
currently configured.
Parameters
<portlist> − Specifies a port or range of ports to be configured.
If no parameter is specified, the system will display the current LACP
status for all ports.
Restrictions
None.
Example usage:
To display LACP port mode settings:
DES-3200-28:4#show lacp_ports 1-10
Command: show lacp_ports 1-10
Port Activity
------ --------
1 Active
2 Active
3 Active
4 Active
5 Active
6 Active
7 Active
8 Active
9 Active
10 Active
DES-3200-28:4#