D-Link DES-3200 Switch User Manual


 
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
250
show authen_policy
Purpose
Used to display the system access authentication policy status on
the Switch.
Syntax
show authen_policy
Description
This command will show the current status of the access
authentication policy on the Switch.
Parameters
None.
Restrictions
None.
Example usage:
To display the system access authentication policy:
DES-3200-28:4#show authen_policy
Command: show authen_policy
Authentication Policy: Enabled
DES-3200-28:4#
create authen_login method_list_name
Purpose
Used to create a user defined method list of authentication methods
for users logging on to the Switch.
Syntax
create authen_login method_list_name <string 15>
Description
This command is used to create a list for authentication techniques
for user login. The Switch can support up to eight method lists, but
one is reserved as a default and cannot be deleted. Multiple method
lists must be created and configured separately.
Parameters
<string 15> Enter an alphanumeric string of up to 15 characters to
define the given method list.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To create the method list “Zira.”:
DES-3200-28:4#create authen_login method_list_name Zira
Command: create authen_login method_list_name Zira
Success.
DES-3200-28:4#
config authen_login
Purpose
Used to configure a user-defined or default method list of authentication