Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
258
config authen application
enable − Use this parameter to configure an application for upgrading
a normal user level to administrator privileges, using a previously
configured method list.
default – Use this parameter to configure an application for user
authentication using the default method list.
method_list_name <string 15> − Use this parameter to configure an
application for user authentication using a previously configured
method list. Enter an alphanumeric string of up to 15 characters to
define a previously configured method list.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To configure the default method list for the Web interface:
DES-3200-28:4#config authen application http login default
Command: config authen application http login default
Success.
DES-3200-28:4#
show authen application
Purpose
Used to display authentication methods for the various applications
on the Switch.
Syntax
show authen application
Description
This command is used to display all of the authentication method lists
(login, enable administrator privileges) for Switch configuration
applications (console, telnet, SSH, Web) currently configured on the
Switch.
Parameters
None.
Restrictions
None.
Example usage:
To display the login and enable method list for all applications on the Switch:
DES-3200-28:4#show authen application
Command: show authen application
Application Login Method List Enable Method List
------------- ------------------ ---------------------
Console default default
Telnet Zira default
SSH default default
HTTP default default
DES-3200-28:4#
create authen server_host
Purpose
Used to create an authentication server host.
Syntax
create authen server_host <ipaddr> protocol [tacacs | xtacacs | tacacs+ |
radius] {port <int 1-65535> | key [<key_string 254> | none] | timeout <int