D-Link DES-3200 Switch User Manual


 
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
381
enable loopdetect
Purpose
Used to globally enable the loop-detect function on the Switch.
Syntax
enable loopdetect
Description
This command is used to allow the loop detection function to be globally enabled on the Switch.
The default value is disabled.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage :
To enable loopback detection on the Switch:
DES-3200-28F:4# enable loopdetect
Command: enable loopdetect
Success.
DES-3200-28F:4#
disable loopdetect
Purpose
Used to globally disable the loopback detection on the Switch.
Syntax
disable loopdetect
Description
This command is used to globally disable the loopback detection on the Switch. The
default value is disabled.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage
To disable the loopback detection function on the Switch:
DES-3200-28F:4# disable loopdetect
Command: disable loopdetect
DES-3200-28F:4#