xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
184
Command Parameters
show 802.1x user
Each command is listed, in detail, in the following sections:
enable 802.1x
Purpose
Used to enable the 802.1X server on the Switch.
Syntax
enable 802.1x
Description
This command is used to enable the 802.1X Network Access control
application on the Switch. To select between port-based or Host-based,
use the config 802.1x auth_mode command.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To enable 802.1X switch wide:
DES-3200-28:4#enable 802.1x
Command: enable 802.1x
Success.
DES-3200-28:4#
disable 802.1x
Purpose
Used to disable the 802.1X server on the Switch.
Syntax
disable 802.1x
Description
This command is used to disable the 802.1X Network Access control
application on the Switch.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To disable 802.1x on the Switch:
DES-3200-28:4#disable 802.1x
Command: disable 802.1x
Success.
DES-3200-28:4#
show 802.1x
Purpose
Used to display the current authentication state and authentication configuration of the 802.1X
server on the Switch.
Syntax
show 802.1x [auth_state | auth_configuration] {ports <portlist>}
Description
This command is used to display the current configuration or authentication state of the 802.1X
server on the Switch.