Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
337
show limited_multicast_addr
Syntax
show limited_multicast_addr ports {<portlist>}
Description
This command is used to display the multicast filter profiles bound to
ports.
Parameters
<portlist> - A port or range of ports on which the limited multicast
address range to be shown has been assigned. If no portlists are
specified, the system will display all ports on which the limited
multicast address range is to be shown.
Restrictions
None.
Example usage:
To show the limited multicast address on ports 1 and 3:
DES-3200-28:4#show limited_multicast_addr ports 1,3
Command: show limited_multicast_addr ports 1,3
Port : 1
Access: permit
Profile ID Name Multicast Addresses
---------- -------------------------------- ----------------------
Port : 3
Access: permit
Profile ID Name Multicast Addresses
---------- -------------------------------- ----------------------
DES-3200-28:4#
config max_mcast_group
Purpose
Used to configure the maximum number of multicast groups a port
can join.
Syntax
config max_mcast_group ports <portlist> max_group <value 1-
1024>
Description
This command is used to configure the maximum number of
multicast groups that a port can join.
Parameters
<portlist> - A range of ports to configure the maximum multicast
group.
max_group - Specifies the maximum number of multicast groups.
The range is from 1 to 1024. 1024 is the default setting.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To configure the maximum multicast address groups on ports 1 and 3 as 100: