Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
340
enable lldp
Purpose
Used to enable LLDP operations on the Switch.
Syntax
enable lldp
Description
This command is used for global control of the LLDP function.
When this function is enabled, the Switch can start to transmit LLDP
packets and receive and process the LLDP packets.
The specific function of each port will depend on the per port LLDP
setting. For the advertisement of LLDP packets, the Switch announces
the information to its neighbor through ports. For the receiving of LLDP
packets, the Switch will learn the information from the LLDP packets
advertised from the neighbor in the neighbor table.
The default state for LLDP is disabled.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage
To enable LLDP:
DES-3200-28:4# enable lldp
Command: enable lldp
Success.
DES-3200-28:4#
disable lldp
Purpose
Used to disable LLDP operation on the Switch.
Syntax
disable lldp
Description
This command is used to stop the sending and receiving of LLDP
advertisement packets.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage
To disable LLDP:
DES-3200-28:4# disable lldp
Command: disable lldp
Success.
DES-3200-28:4#