Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
382
show loopdetect
Purpose
Used to display the Switch’s current loopback detection configuration.
Syntax
show loopdetect
Description
This command is used to display the Switch’s current loopback detection configuration.
Parameters
None.
Restrictions
None.
Example usage:
To display the current loopback detection configuration on the Switch:
DES-3200-28F:4#show loopdetect
Command: show loopdetect
LBD Global Settings
---------------------------
LBD Status : Disabled
LBD Mode : Port Based
LBD Interval : 10
LBD Recover Time : 60
LBD Trap Status : None
DES-3200-28F:4#