D-Link DES-3200 Switch User Manual


 
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
262
show authen server_host
Port – The virtual port number on the server host. The default value is
49.
Timeout The time in seconds the Switch will wait for the server host
to reply to an authentication request.
Retransmit The value in the retransmit field denotes how many
times the device will resend an authentication request when the
TACACS server does not respond. This field is inoperable for the
tacacs+ protocol.
Key Authentication key to be shared with a configured TACACS+
server only.
Parameters
None.
Restrictions
None.
Example usage:
To view authentication server hosts currently set on the Switch:
DES-3200-28:4#show authen server_host
Command: show authen server_host
IP Address Protocol Port Timeout Retransmit Key
------------ -------- ----- ------- ---------- ------------
10.53.13.94 TACACS 49 5 2 No Use
Total Entries : 1
DES-3200-28:4#
create authen server_group
Purpose
Used to create a user-defined authentication server group.
Syntax
create authen server_group <string 15>
Description
This command is used to create an authentication server group. A
server group is a technique used to group
TACACS/XTACACS/TACACS+/RADIUS server hosts into user
defined categories for authentication using method lists. The user
may add up to eight authentication server hosts to this group using
the config authen server_group command.
Parameters
<string 15> Enter an alphanumeric string of up to 15 characters to
define the newly created server group.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To create the server group “group_1”:
DES-3200-28:4#create authen server_group group_1
Command: create authen server_group group_1
Success.
DES-3200-28:4#