Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
138
show cos mapping
Purpose
Used to show CoS mapping.
Syntax
show cos mapping {port <portlist> }
Description
This command is used to display information regarding CoS
mapping enabled ports and their mapping method.
Parameters
<portlist> − Specifies a range of ports to be displayed. If no
parameter is specified, the all ports priority settings will be shown.
Restrictions
None.
Example usage:
To show the CoS mapping information:
DES-3200-28:4#show cos mapping
Command: show cos mapping
Port Ethernet_priority IP_priority
---- ----------------- -----------
1 802.1p off
2 802.1p off
3 802.1p off
4 802.1p off
5 802.1p off
6 802.1p off
7 802.1p off
8 802.1p off
9 802.1p off
10 802.1p off
11 802.1p off
12 802.1p off
13 802.1p off
14 802.1p off
15 802.1p off
16 802.1p off
17 802.1p off
18 802.1p off
19 802.1p off
20 802.1p off
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All