Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
189
config 802.1x capability ports
Syntax
config 802.1x capability ports [<portlist> | all] [authenticator | none]
Description
This command has two capabilities that can be set for each port,
authenticator and none.
Parameters
<portlist> − Specifies a port or range of ports to be configured.
all − Specifies all of the ports on the Switch.
authenticator − A user must pass the authentication process to gain
access to the network.
none − The port is not controlled by the 802.1X functions.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To configure 802.1X capability on ports 1 to 10:
DES-3200-28:4#config 802.1x capability ports 1–10 authenticator
Command: config 802.1x capability ports 1–10 authenticator
Success.
DES-3200-28:4#