Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
388
show dot1v_protocol_group
Purpose
Used to display the protocols defined in a protocol group.
Syntax
show dot1v_protocol_group {[group_id <int 1-16> | group_name
<name 32>]}
Description
This command is used to display the protocols defined in protocol
groups.
Parameters
group_id – Specifies the group ID to be displayed. If a group ID is not
specified, all configured protocol groups will be displayed.
group_name – The name of the protocol group.
Restrictions
None.
Example usage:
To display the protocol group ID 1:
DES-3200-28:4# show dot1v_protocol_group group_id 1
Command: show dot1v_protocol_group group_id 1
Protocol Group ID Protocol Group Name Frame Type Protocol Value
----------------- -------------------------------- -------------- --------------
1 General_Group EthernetII 86dd
1 General_Group IEEE802.3 SNAP 86dd
Total Entries: 1
DES-3200-28:4#