D-Link DES-3200 Switch User Manual


 
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
65
config snmp system_name
Purpose
Used to configure the name for the Switch.
Syntax
config snmp system_name {<sw_name>}
Description
This command is used to configure the name of the Switch.
Parameters
<sw_name> A maximum of 128 characters is allowed. A NULL
string is accepted if no name is desired.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To configure the Switch name for “DES-3200-28 Switch”:
DES-3200-28:4#config snmp system_name DES-3200-28 Switch
Command: config snmp system_name DES-3200-28 Switch
Success.
DES-3200-28:4#
enable rmon
Purpose
Used to enable RMON on the Switch.
Syntax
enable rmon
Description
This command is used, in conjunction with the disable rmon
command below, to enable and disable remote monitoring (RMON)
on the Switch.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example Usage:
To enable RMON:
DES-3200-28:4#enable rmon
Command: enable rmon
Success.
DES-3200-28:4#