xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
318
40
ASYMMETRIC VLAN COMMANDS
The Asymmetric VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table:
Command Parameters
enable asymmetric_vlan
disable asymmetric_vlan
show asymmetric_vlan
Each command is listed, in detail, in the following sections:
enable asymmetric_vlan
Purpose
Used to enable asymmetric VLANs on the Switch.
Syntax
enable asymmetric_vlan
Description
This command is used to enable the asymmetric VLAN function on
the Switch
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To enable asymmetric VLANs:
DES-3200-28:4#enable asymmetric_vlan
Command: enable asymmetric_vlan
Success.
DES-3200-28:4#
disable asymmetric_vlan
Purpose
Used to disable asymmetric VLANs on the Switch.
Syntax
disable asymmetric_vlan
Description
This command is used to disable the asymmetric VLAN function on
the Switch
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To disable asymmetric VLANs: