Filter
Top Products
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
146
DES-3200-28:4#create vlan v1 tag 2
Command: create vlan v1 tag 2
Success.
DES-3200-28:4#
delete vlan
Purpose
Used to delete a previously configured VLAN on the Switch.
Syntax
delete vlan <vlan_name 32> | vlanid <vidlist>
Description
This command will delete a previously configured VLAN on the
Switch.
Parameters
<vlan_name 32> − The VLAN name of the VLAN to delete.
<vidlist> − Specifies a range of multiple VLAN IDs to be deleted.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To remove the VLAN “v1”:
DES-3200-28:4#delete vlan v1
Command: delete vlan v1
Success.
DES-3200-28:4#
config vlan
Purpose
Used to add additional ports to a previously configured VLAN.
Syntax
config vlan <vlan_name 32> {[add [tagged | untagged | forbidden] |
delete] <portlist> | advertisement [enable | disable]} (1)
Description
This command is used to add ports to the port list of a previously
configured VLAN. The user can specify the additional ports as
tagging, untagging, or forbidden. The default is to assign the ports as
untagging.
Parameters
<vlan_name 32> − The name of the VLAN to which to add ports.
add − Entering the add parameter will add ports to the VLAN. There
are three types of ports to add:
tagged − Specifies the additional ports as tagged.
untagged − Specifies the additional ports as untagged.
forbidden − Specifies the additional ports as forbidden
delete − Deletes ports from the specified VLAN.
<portlist> − A port or range of ports to add to, or delete from the
specified VLAN.
advertisement [enable | disable] − Enables or disables GVRP on the
specified VLAN.
Restrictions
Only Administrator-level users can issue this command.