D-Link DES-3200 Switch User Manual


 
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Guide
477
enable erps
Purpose
Used to enable the global ERPS function on the Switch.
Syntax
enable erps
Description
This command is used to enable the global ERPS function on the Switch. For each
ring with the ring state enabled when ERPS is enabled, the following integrity will be
checked:
1. A R-APS VLAN is created.
2. The Ring port is a tagged member port of the R-APS VLAN.
3. The RPL port is specified if the RPL owner is enabled.
The default state is ERPS disabled.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To globally enable ERPS:
DES-3200-28F:4# enable erps
Command: enable erps
Success.
DES-3200-28F:4#
disable erps
Purpose
Used to disable ERPS function on the Switch. The default setting on the Switch is
ERPS disabled.
Syntax
disable erps
Description
This will disable ERPS on the Switch. The default setting is ERPS disabled.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage
To globally disable ERPS:
DES-3200-28F:4# disable erps
Command: disable erps
Success.
DES-3200-28F:4#