Filter
Top Products
Chapter 6: Operation - User Functions
79
If the ID Display is set to “On,” the number in the second field,
Seconds, indicates how many seconds it will remain onscreen.
Using leading zeroes if necessary, type a two-digit number of
seconds from 01 to 24, or use the
and keys to increase
and decrease the current value by 1 respectively. If you type a
number greater than 24, the second field will be filled with a “- -”,
indicating that the ID Display will be shown at all times. The
default setting is 03. If the ID Display is set to “Off,” the number
in this field will have no effect.
Sleep Mode: A power-saving mode that is activated once a user
logs in. Sleep mode acts as a screensaver if the user station is idle
(no keyboard or mouse activity) for a specified amount of time. Sleep
mode is user-specific; whatever mode a user sets applies to only that
user once logged in. Edit this field and the Minutes field that follows
to determine how the system handles sleep mode. Possible values
are Saver, Green, and Off. Use the
and keys to toggle
between these values.
Saver: The OSUI, with or without background, is a “floater” and
appears regularly in random locations on the screen.
Green: The monitor goes blank.
Off: Sleep Mode is disabled and the screen displays normal
video indefinitely.
If Sleep Mode is set to Saver or Green, in the Minutes field, type
the number of minutes of inactivity before Sleep Mode is
triggered. Using leading zeroes if necessary, type a two-digit
number of minutes from 01 to 99, or use the
and keys to
increase and decrease the current value by 1 respectively. The
default setting is 05. If Sleep Mode is set to “Off,” the number in
this field will have no effect.