Filter
Top Products
How-To: Paragon Essentials
xxi
3. Unzip the downloaded file. There are a file named
ParagonUpdate_xxx.exe (xxx represents the version) and a firmware
file for the user station. If using the P2-EUST, the firmware file is
named EUST-xxx.hex. If using the P2-UST, the firmware file is
named V5-xxx.hex (xxx represents the version).
4. Double click “ParagonUpdate_xxx.exe” to execute the program.
5. Enter the information about the user station in the Paragon Update
utility. For example:
In the Name column, type P2-EUST-1
In the IP address/Serial column, select <Default Serial>
In the Port column, type 2. This represents the serial
port—COM2
6. Ensure the checkbox before the user station is selected (
).
7. Click Load Hex File to select the firmware file.
8. To start the upgrade, click Send To Paragon --> Yes.
9. Once the upgrade is completed, a message appears.
See General Update Procedure (on page 167) and Parag
on
Mana
ger User Guide for details. This user guide is available on
Raritan website's Firmware and Documentation section
(http://www.raritan.com/support/firmware-and-documentation/).