Filter
Top Products
Chapter 7: Operation - Administrator Functions
104
If Login Sleep is set to Saver or Green, in the Minutes field,
type the number of minutes of inactivity before Login Sleep is
triggered. Using leading zeroes if necessary, type a two-digit
number of minutes from 01 to 99, or use the
and keys to
increase and decrease the current value by 1 respectively. The
default setting is 05. If Login Sleep is set to “Off,” the number in
this field has no effect.
Require Password: Determines whether a user can specify a
blank password, that is, delete any existing password and have
no password at all. Use the
and keys to toggle between
“No” (users may delete their existing passwords) and “Yes” (the
default setting; starting with the first time they change their
password, users must always specify a password). Newly
created users always start with no password, and must assign
one to themselves during initial setup.
Default Login Name Blank: Determines whether the User Name
field in the Login screen will be blank, or if the field will contain
the default user name (the first available “userxy” name, where
“xy” is a two-digit number with leading zeroes—“user01,”
“user02,” and so on). Use the
and keys to toggle between
“Yes” (the field is blank – the default value) and “No” (field
contains the user name).
2. When you are finished, either press Enter followed by the letter S to
save your changes, or press Esc to abort the changes and continue
using the previous settings.