Filter
Top Products
Chapter 3: Rackmount and Installation
27
d. The Channel Configuration menu appears. Use the
and
keys and Page Up and Page Down keys to approach channel
ports to which subsidiary Paragon switches are connected. The
port default device names appear in the Name column and the
device type in the Device column. ("P242" for a 2 x 42 switch
[P2-UMT242], "P442" for a 4 x 42 switch [P2-UMT442], "P832"
for an 8 x 32 switch [P2-UMT832M], or "P1664" for a 16 x 64
switch [P2-UMT1664M].
e. Continue using the
and keys and Page Up and Page
Down keys to move the yellow highlight to the Name field for the
channel port number where a subsidiary Paragon switch is
installed and press Enter. The highlight should turn light blue.
f. Type the name you want to assign to the subsidiary Paragon
switch on this channel port (the highlight should turn green when
you start typing). Press Enter when finished and then press S to
save the new name. All other paths (channel ports) by which that
subsidiary Paragon switch is attached to the Paragon switch
above it will be given the same name automatically.