Filter
Top Products
Appendix E: Other Raritan Components Working with Paragon II
210
When installation is complete, a shortcut to the application has been
added to your Start menu.
Remotely Refreshing IBM BladeCenter Channel Status
You can use Paragon Manager to remotely update the channel status of
IBM BladeCenter after connecting and logging in to the Paragon system
from Paragon Manager.
To refresh IBM BladeCenter Channel Status
1. Verify whether the Device View panel sorts channels by channel
numbers. If not, click the View By Channel tab.
2. Locate the IBM BladeCenter chassis channel, which is preceded with
a plus sign.
3. Right-click the channel and select Property. The Channel Information
Editor dialog appears.
4. Type RefreshBLD-I in the Name field. Note the command is
case-sensitive.
5. Click OK and the Paragon system updates IBM Blade channel status
for 2 to 4 minutes.
CommandCenter Secure Gateway Integration
There are two ways to remotely access and control the Paragon II
system from CommandCenter Secure Gateway (CC-SG).
PCCI integration: The Paragon II System Controller (P2SC) appears
as a device and the servers in the Paragon II system appear as
nodes in CC-SG under this environment. You can directly access the
servers by accessing the server nodes in CC-SG without going
through the OSUI login screen.
Dominion KX II integration: The Paragon II system is regarded as a
KX II channel so it appears as a node in CC-SG under this
environment. You must first access this node, and then log in to it by
going through the OSUI screen before you can access its servers.
PCCI Integration
In the PCCI environment, Paragon II works within the P2SC setup, and
we recommend you first read the Paragon II System Controller (P2SC)
User/Deployment Guide for initial installation and configuration of your
Paragon II System Controller device. This document is available on the
Raritan website.
Important: P2SC is NOT available for sale from the second half of
2009.