Filter
Top Products
Chapter 10: Configurations
161
Example B: Improper cable length difference:
P2-HubPac Configuration and Multiple Video
Read this section if performing the Multiple Video function in a Paragon II
system in which the P2-HubPac is installed.
Configuration for Multiple Video
In order to perform the Multiple Video function in a system involving the
P2-HubPac, each "switch port" of the same five-port cluster of the
P2-HubPac must be attached to a Paragon switch connected to a
DIFFERENT Base Unit.
In other words, the Paragon switches connected to the same cluster
cannot share the same Paragon Base Unit.
This diagram indicates the four switch ports on a five-port cluster. The
switch ports are marked as x-1, x-2, x-3 and x-4 respectively (x
represents the cluster number).