Filter
Top Products
Chapter 1: Introduction
4
Provides an extra RJ45 port for chaining of Z-CIMs for clustered
access
P2CIM-SER, P2CIM-SER-EU and AUATC
Support servers or ASCII serial devices connected to the
Paragon II system through their RS-232 serial ports
P2CIM-APS2DUAL
Supports servers with IBM PS/2-type keyboard and mouse ports
Doubles the number of users that have access to a particular
server
Provides automatic skew compensation when working with
P2-EUST or P2-EUST/C
P2CIM-AUSBDUAL
Supports servers with USB- or Sun USB-type keyboard and
mouse ports
Doubles the number of users that have access to a particular
server
Provides automatic skew compensation when working with
P2-EUST or P2-EUST/C
P2CIM-APS2-B
Supports IBM BladeCenter
®
(blade servers) with IBM PS/2-type
keyboard and mouse ports
Provides automatic skew compensation when working with
P2-EUST or P2-EUST/C
P2CIM-AUSB-B
Supports IBM BladeCenter
®
(blade servers) with USB-type
keyboard and mouse ports
Provides automatic skew compensation when working with
P2-EUST or P2-EUST/C
Important: As of release 4.4.1, Paragon II no longer supports
Paragon I Z-CIMs, including the UKVMSPD, which supports local
PC mode. Therefore, to ensure your system continues working with
these first generation Z-CIMs, do NOT upgrade it to 4.4.1 or later. If
a downgrade to 4.4 is needed, you can download prior firmware
releases from
the Raritan website
(
http://www.raritan.com
). For
details, see
Downloading Release 4.4 Firmware
(on page 224).