Filter
Top Products
Appendix D: Connecting Serial Devices to Paragon II System
207
To program any of your keyboard's twelve function keys with commands
or data items you frequently have to send the device, activate the Set Up
Programmable Keys screen by pressing Alt + F3. Once a string (with a
maximum length of sixteen characters) has been assigned to a key,
pressing that key while in On Line Mode will send the entire string to the
device.
Troubleshooting AUATC
If you do not get a device prompt:
1. If AUATC's screen is displayed on your monitor with the top and
bottom help windows, make sure that it indicates On Line status. If
not, press Esc to return to On Line Mode.
2. Make sure that AUATC and the attached device are both receiving
power. AUATC's power supply should be securely connected to both
AUATC and a working outlet. Its LED (next to the 6-pin mini-DIN
PS/2 mouse connector) should flicker quickly if data is being
transmitted and blink once per second at other times.
3. Make sure that the cable between AUATC and the device is securely
attached at both ends. This must be the null-modem cable included
with AUATC or one just like it.
4. Make sure that the serial-communication settings of AUATC match
those of the device. Press Alt + F2 to check AUATC's settings in its
Setup Screen.
If you do not get any video or the video is degraded or distorted:
1. Make sure that all of your cables are connected securely.
2. Make sure that your monitor can handle 800 x 600 video resolution
at a refresh rate of 60 Hz.