Filter
Top Products
Chapter 4: Front Panel Display and Controls
40
Normal Display
After the start-up test, LCD panel displays two lines of messages:
Line 1: Running message: "Raritan Computer Paragon II:
Paragon832/1 Ready"
For a Paragon II model P2-UMT832M, "Paragon832" is the default
name (this name may be changed through the OSUI's System
Configuration submenu).
Line 2: User port status message: "A/N User (1, 2, 3 ...) -> None"
User port status displays a scrolling status of all user ports, one user
port per second. The User's active channel, 1 through 128, is
displayed after the user port number.
A=Active User # 1-8
—OR—
N=Non-Active User # 1-8
Power Up Option
If you hold down the FUNC button on the front panel of the Paragon
switch during Power Up, the Paragon switch will clear its database and
reset to factory defaults. Confirm functions by pressing the ENT button
on the front panel.
When "Clear Database Hit Ent/ESC?" appears on the LCD:
Press the ESC button if you want to exit the screen without clearing
the database.
Press the ENT button if you want to clear the database. "Clear All?"
appears on the LCD.
If you press the ESC button once more, the channel configuration
will be cleared and will be rebuilt later by the Paragon switch.
This is called a Partial Reset.