Filter
Top Products
Chapter 8: P2ZCIMs and Z-CIMs
131
Prior to P2ZCIM tier installation, you must:
Turn ON all Paragon II components.
Turn OFF all servers in the P2ZCIM chain.
When following the installation and configuration instructions, sort the
Selection Menu by channel number, not by name. Display the Selection
Menu by pressing the F2 key on your keyboard and change the sorting
method by pressing the F12 key.
To connect a P2ZCIM as a tier
1. Connect a Cat5 UTP cable to the channel port on the Paragon II
switch reserved for the P2ZCIM chain.
2. Connect the other end of this Cat5 UTP cable to the UTP OUT (O)
port on a P2ZCIM, which will be the first P2ZCIM in the chain.
3. Connect a server to the first P2ZCIM.
a. Connect the 6-pin mini-DIN keyboard and mouse and HD15
video connectors on the P2ZCIM to the server’s keyboard,
mouse, and video ports.
b. Place the P2ZCIM Terminator in the P2ZCIM’s UTP IN (I) port.
c. Turn ON the server.
To perform P2ZCIM channel configuration
1. At a user-station Login screen, type admin in the User Name field
and press Enter.
2. Type the default password raritan or your new password, if
already changed, in the Password field and press Enter.
3. Press F5 to go to the Administration Menu and select the Channel
Configuration submenu.
4. Use the
and or the Page Up and Page Down keys to
highlight the Paragon II channel where the P2ZCIM was just added.
5. Ensure that the Device field reads P2-ZCIM for a P2ZCIM.
6. If P2-ZCIM does not appear in the Device field:
a. Press Tab until the Device field is highlighted and then press
Enter—the highlight will turn light blue.
b. Use the
and keys to change device type to P2-ZCIM and
press Enter—the light blue highlight will return to yellow.
c. Press S to save the change, or press Esc to exit without saving.
7. If a more descriptive name is desired:
a. Hold the Shift key and press Tab to go back to the Name field,
and then press Enter—the highlight will turn light blue.