Filter
Top Products
Chapter 7: Operation - Administrator Functions
121
Network Settings
To configure Paragon II's network settings from the OSUI, select option 7,
Network Settings, from the Administration Menu.
Current IP: This field allows administrators to configure the Paragon
II's address on the network. Use the arrow keys to scroll over to each
byte and change the IP as needed. The default IP address is
192.168.0.192.
Net Mask: The net mask for the Paragon switch is set at a default
value of 255.255.255.0. Reset this as necessary.
Gateway IP: This default is set to 192.168.0.1. Reconfigure as
needed.
Port No: Default is 3000.
Encryption: If you enable Encryption for the network port,
communications between the Paragon switch and Paragon Manager
clients run from a PC are encrypted with a 128-bit key. Default
setting is Off.
Note: The Ethernet port on the Paragon switch is hard coded (not
configurable) and supports only 10-BaseT/half duplex.