Filter
Top Products
Chapter 3: Rackmount and Installation
33
HubPac
Server
CIM
Cat5 cable
Paragon switch (the model illustrated is P2-UMT1664M)
User station
Monitor, keyboard and mouse connected to the user station
To install a HubPac
1. Turn OFF each Paragon switch.
Note: Prior to installation all Paragon switches and HubPac devices
must be turned OFF. Servers and user stations to be connected can
be in a powered ON state.
2. Connect a server, via CIM, to the HubPac:
Note: Up to 8 servers can be connected to one HubPac. Each 5-port
cluster on the HubPac represents one server connection, with four
associated HubPac switch ports. Each HubPac switch port in a
cluster can be attached to a separate Paragon switch, enabling
users of these attached Paragon switches to access the same
server.