Filter
Top Products
Chapter 3: Rackmount and Installation
23
b. Press F5 to activate the Administration Menu. Use the and
keys to move the highlight to the Channel Configuration entry
and press Enter.
c. The Channel Configuration submenu appears. Use the
and
keys or Tab to move the yellow highlight to the Name field for
the channel port number where you installed the server and
press Enter. The highlight turns light blue.
d. Edit the name (the highlight turns green when you start typing).
Press Enter when finished, and press S to save the new name.
e. Press F2 to return to the Selection Menu. Verify that the new
name appears in the Selection Menu.
7. Repeat Steps 5 and 6 for each CIM and server you want to connect
to the Paragon switch’s channel ports.