Filter
Top Products
Chapter 4: Front Panel Display and Controls
42
Press the ESC button on the front panel at any time to return to Normal
Display.
Test User UST1
This function checks whether user stations (USTs) are functioning
properly.
1. Press the
or button to change user port number. Display will
read "OK", "None", or "Failed."
If a "Failed" condition is detected, make sure the Cat5 UTP cable
is installed properly and secured, or try using another user
station (UST) to see if the user station under test has become
defective.
2. Press the ESC button on the front panel at any time to return to
Normal Display.
Test Chan. UKVM
This function checks whether a CIM is functioning properly.
1. Press the
or button to change channel number. Display will
read "OK", "None", or "Failed."
If a "Failed" condition is detected, make sure the Cat5 UTP cable
is installed properly and secured, or try using another CIM to see
if the CIM under test has become defective.
2. Press the ESC button on the front panel at any time to return to
Normal Display.
Stacking Support
1. Press the
or button to set the Stacking Unit ID number (0~3
for a P2-UMT832M or 0~1 for a P2-UMT1664M).
The default is set to "0" (no Stacking Units connected).
If you wish to add Stacking Units, this number must be equal to
the number of Stacking Units connected.