Filter
Top Products
Chapter 6: Operation - User Functions
64
Selection Menu Sorted by Channel Name
The Selection Menu displays up to eight channel ports per page; total
number of pages appears in the upper right-hand corner, for example
“Page 2/5” indicates that you are on the second of five pages. Use the
Page Up and Page Down keys on your keyboard to move between the
pages. Once you have selected a server as described on the following
pages, Paragon II will switch to that channel port. If “ID Display” is
enabled in the User Profile configuration, a display will appear at the top
of your screen to identify the chosen channel port for the number of
seconds set.
To select a server from the Selection Menu
1. If the OSUI does not show the Selection Menu, press F2.
2. Press F12 to toggle the menu to sort-order view of your choice (by
channel number or alphabetically by channel name). The entry for
the channel port you currently have selected (if any) will be
highlighted and will have a small red arrow (
) to the left of its
channel port name.
Note: In the channel number view, the Selection Menu can display
either all channel ports or only those channel ports that the current
user is allowed to select (the default view). If the system
administrator has set the “Display All Computers” option in the
System Configuration menu (see "System Configuration" on
page 101) to "Yes", you ca
n pre
ss F10 to toggle between the
restricted and unrestricted views. In the unrestricted "all channel
ports" view, the Paragon displays a red "S" next to the scan rate of
any channel port that the user is not permitted to access.