Filter
Top Products
Chapter 6: Operation - User Functions
87
Power cycle the desired user station(s), be it an ACTIVATOR or
FOLLOWER user station.
Note: If the user station is P2-USTIP, it automatically enters the
remote mode when quitting the Multiple Video mode. Press
Ctrl+Alt+Delete on the P2-USTIP if you want to return to the local
mode.
Limitation
The function is not applicable to those channels which share only
one path via the tiered device, such as P2ZCIM, P2CIM-APS2-B or
P2CIM-AUSB-B (for IBM BladeCenter servers).
For 16-channel associations, the associated channel ports must be
on the Base Unit if your Paragon system is a multi-tier configuration.
Messages on the ACTIVATOR User Station
The success or failure of data outputs from the FOLLOWER channel(s)
will be reported on the screen of the ACTIVATOR user station (see the
example images below).
The 1st FOLLOWER channel successfully outputs its data
The 2nd FOLLOWER channel successfully outputs its data
The 3rd FOLLOWER channel fails to output its data
Every FOLLOWER channel successfully outputs its data