Filter
Top Products
Chapter 5: Information about Keyboard, Mouse and Video
55
3. Press Left Ctrl + NumLock to enter the setting mode. A message
similar to the following appears in the text editor.
A
Available mouse setting codes
B
Current mouse setting is set to standard 3-button wheel mouse
(code 0)
4. Type m1 to have the CIM support the use of 4-8 button wheel
mouse.
5. Either press Esc to exit the setting mode or close the text editor.
6. Press the hot key (default: Scroll Lock) twice quickly to trigger the
OSUI Selection Menu and re-select the same channel to make the
new mouse setting effective.
To reverse the mouse type from 4-8 buttons to 3 buttons, simply repeat
the above steps 1 through 3, and then type m0.