Filter
Top Products
Chapter 2: Quick Start
15
2. Depending on the CIM model you purchased, plug the connectors of
the CIM into a server's PS/2 or USB keyboard, mouse, and VGA
ports.
Tip: If the server provides a DVI-D connector instead of a VGA port,
Raritan recommends that you connect the CIM to the server using a
Smart View DVI-to-VGA (female to female) converter (DV-101). Note
that currently only the Smart View DVI-to-VGA converter has been
tested and is officially supported by Raritan for use with Paragon II.
3. Turn on the server.
4. Repeat Steps 1 to 3 for all other servers you want to connect to
remaining Channel Ports.
Initial Verification
To verify that the server connected to the Paragon system can
be operated:
1. Turn on all devices in the Paragon II system.
2. The Login screen of the On-Screen User Interface (OSUI) is
displayed on the monitor connected to the user station.
3. Type your user name and password in the appropriate fields and
press Enter. For example, if you are the administrator:
a. Type admin in the User Name field and press Enter.
b. Type raritan (the default password; all lowercase) in the
Password field and press Enter. Note the password is
case-sensitive.