Filter
Top Products
Chapter 8: P2ZCIMs and Z-CIMs
140
6. Plug in and turn ON the server. If the UKVMSPD is installed and
operating properly, the UKVMSPD green LED will start blinking
(once per second when the UKVMSPD is idle, more quickly while
data passes in either direction).
After finishing this installation, activate Local PC Mode on the user
station.
To activate the Local PC mode
1. Log in at the connected user station.
2. Press the hot key (default: Scroll Lock) twice rapidly to activate the
OSD.
3. Press F4 to activate the User Profile menu.
4. Press Tab or the
and keys to move the highlight to the Local
PC field.
5. Press Enter. The Local PC field will turn green.
6. Press the
and to toggle the value of the field to “On.”
7. Press Enter. The highlight will turn yellow.
8. Press S to save the change. If you do not wish to save changes,
press the Esc key to abort the changes.
When Local PC Mode is turned on, you can access the dedicated local
PC server from this user station by pressing the Home key twice rapidly
while viewing the OSD. The user station will immediately switch you to
the local PC. To return to the Paragon system and its connected servers,
activate the OSD by pressing the hot key twice (default: Scroll Lock),
and access any of the listed servers from the Selection Menu.