Filter
Top Products
Chapter 6: Operation - User Functions
69
The path information includes “name of the base/tiered device,”
“number of the selected user port” and “number of the selected
channel port.” If this symbol “- -” is displayed, it indicates the port
number is currently unknown, and this port number will be displayed
only when you access to the next channel.
Device name of the base unit
Selected user port's number
Selected channel port's number
The arrow indicates the current tier which you are on
Device name of the currently selected tiered device
The user port's number is currently unknown
4. Repeat steps 2 to 3 if you want to access the third-tier device.
5. Choose the channel port of the desired server in the specific tiered
device's Selection Menu.
Note: Manual Path Selection is automatically disabled and replaced by
Automatic Path Selection when one of the following scenarios occurs:
(1) The desired server is accessed while the Selection Menu is sorted by
channel name instead of the channel number.
(2) The path passes through Paragon II products with the firmware
version older than 3E3. You must upgrade their firmware to support this
function. See Firmware Upgrade (on page 167) for more information.
(3) T
he path
passes through Paragon I products. If the Paragon I
hardware version is older than HW3, it is impossible to support the
Manual Path Selection function. But if the hardware version is HW3 (the
HW3 unit has only one stacking port), you can upgrade its firmware to
support this function. See Firmware Upgrade (on page 167) for more
inform
ation.