Filter
Top Products
Chapter 8: P2ZCIMs and Z-CIMs
133
5. Select the Channel Configuration submenu and press Enter.
6. Use the
and or the Page Up and Page Down keys to select
the P2ZCIM chain you wish to resize.
7. Press Enter and type SetPZSize-NN (NN represents the two-digit
number for the size of your chain, from 01-42).
8. Press Enter.
9. Press S to save the new chain size.
10. Press F2 to go to the Selection Menu and verify that the chain size
has changed.
To refresh a P2ZCIM chain
The Refresh command resets the Communication Addresses of each
P2ZCIM by reassigning all Communication Addresses sequentially. All
active P2ZCIM channels will be rearranged so they are placed together
in the former part of the channel list.
1. At a user-station Login screen, type admin in the User Name field
and press Enter.
2. Type raritan or your new password in the Password field and
press Enter.
3. If the Selection Menu is not sorted by the channel number, press F12
to toggle the sorting.
4. Press the F5 key.
5. Select the Channel Configuration submenu and press Enter.
6. Use the
and or the Page Up and Page Down keys to select
the P2ZCIM chain you wish to refresh.