Filter
Top Products
Chapter 6: Operation - User Functions
93
Requisites for Card Reader Functionality
In order to enable the card reader functionality, the following Paragon II
components must be included in the path you choose to access a
specific server.
Reader-enabled user station: P2-EUST/C
Reader-enabled CIM: P2CIM-AUSB-C
Reader-enabled firmware: Paragon II switch (including the Main
Unit and the Stacking Unit, if any) with firmware version 4.3 or later
To utilize the integrated card reader, client authentication software must
have been installed and configured properly in the target servers. The
Paragon II card reader supports the PC/SC specification, enabling
communication between cards and authentication middleware. It also
conforms to the ISO7816 standard for the card-to-reader interface.
Specifically, the reader supports ISO7816 Class A and AB smart cards.
Note: Raritan does not provide the client authentication software. If you
encounter any problems regarding the authentication messages, please
consult the user documentation shipped with the authentication software
or contact your system administrator.
The connection pattern in the chosen path will look like the figure below.
Server