Filter
Top Products
Chapter 2: Quick Start
12
Plug one end of a stacking cable into the port—Expansion
Port Out—on the Stacking Unit.
Plug the other end of the cable into the port—Expansion
Port—on the Main Unit.
b. For connecting P2-UMT1664S to P2-UMT1664M:
Plug one end of the stacking cable into "Expansion Port Out
A" on the Stacking Unit and the other end of the cable into
the lower "Expansion Port In" on the Main Unit.
Plug one end of the other stacking cable into "Expansion Port
Out B" on the Stacking Unit and the other end of the cable
into the upper "Expansion Port In" on the Main Unit.
4. (Optional) You can cascade up to three P2-UMT832S Stacking Units
for a P2-UMT832M Main Unit. To add more Stacking Units, follow
this procedure:
a. Plug one end of a stacking cable into the port—Expansion Port
In—on the last Stacking Unit connected to the Main Unit.
b. Plug the other end of the cable into the port—Expansion Port
Out—on the newly added Stacking Unit.
c. Connect a power cord to the newly added Stacking Unit.
d. Repeat Steps a to c if you want to add one more Stacking Unit.
5. Turn on all Paragon II devices.
6. Set the total number of connected Stacking Units on the front panel
of the Main Unit.
a. Press the FUNC button to activate the Function Menu.
b. Press the
and buttons to select "Stacking Support."
c. Press the ENT button to confirm your selection.
d. Press the
and buttons to select the total number of
Stacking Units—3 maximum for P2-UMT832M or 1 maximum for
P2-UMT1664M.
e. Press the ENT button to save the setting.