Filter
Top Products
Appendix E: Other Raritan Components Working with Paragon II
212
P2-EUST
P2-EUST/C
2. Connect a compatible DCIM to this user station. If the system is a
two- or three-tier system, ensure the user station is one of those
connected to the Base Unit (first tier).
Only two types of DCIMs are supported in this integration:
If using DCIM-USB-G2, plug its connectors into the USB and
video ports on the user station.
If using DCIM-PS2, plug its connectors into the PS/2 and video
ports on the user station.
3. Connect the user station to a KX II device via a Cat5 UTP cable up
to 150 feet (45 m).
Plug one end of the cable to the DCIM's RJ-45 port and the other
end to one of the channel ports on the KX II device.
4. If you want to have more paths to access the same Paragon II
system in KX II or CC-SG, repeat Steps 1 to 3 to connect additional
user stations to KX II.
This diagram indicates the configuration integrating KX II.
The Paragon II system involving Paragon switches,
servers and user stations
The user station with DCIM-USB-G2 or DCIM-PS2